The high-precision horizontal Hooke hinge ensures two degrees of freedom of rotation, with a larger angle range, greater bearing capacity, and higher rotational accuracy, and a compact structure. Suitable for multi degree of freedom structures.

Zhengyu Technology's horizontal Hooke hinges are divided into two types: horizontal Hooke hinge flange type (WF series) and horizontal Hooke hinge screw type (WL series).

Zhengyu Technology provides a series of products to meet the needs of customers for various load-bearing capacity, rotation angles, etc. At the same time, it can provide professional design consulting services for customers.

Precautions for the use and installation of Hooke hinges:

1. Usage precautions

After precise adjustment and assembly, the Huke hinge may cause a decrease in accuracy and damage if it is disassembled, modified, or adjusted to adjust the tightness of the bolts on the bearing seat before leaving the factory.

The main cause of damage is scratches and bumps inside the steel ball or bearing seat caused by falling or strong impact.

2. Installation precautions

Before installing the Huke hinge, ensure that there are no foreign objects attached to the installation surface, and confirm whether there are burrs and whether the position of the bolt holes is correct. These are the reasons for poor accuracy, poor functionality, and damage.

When installing the ball joint, please note that the load should not be too large. Scratches and bumps on the steel ball or bearing seat during installation are the causes of damage.

3. Usage precautions

Pay attention to using within the allowable load and allowable swing angle range.

Prevent dust and foreign objects from entering and affecting performance and service life. Ensure cleanliness during installation and use, and if necessary, install dust covers and implement dust prevention measures.